PET2-4 hour economical luminous film

Product Features
1. Light absorption in bright places and light emission in dark places. The bright part can absorb sunlight, light, ambient stray light and other visible light, and the dark part can automatically and continuously emit light, giving people more information in the dark.
2. Safety and environmental protection. Tested by the Chinese Academy of Metrology, the product is non-toxic, non radioactive and has stable chemical performance.
3. No power supply, low excitation conditions, sunlight, general lighting, ambient stray light can be used as excitation light source.
4. The high brightness and long luminous time far exceed the requirements of fire evacuation.
5. Simple installation and convenient maintenance. It can be flexibly installed according to the actual needs of public places, and signs can be installed at different parts of the ground, ladder surface and ceiling.
6. It can be reused for unlimited times with a safety factor of 100%.
7. It has good aging resistance, corrosion resistance, heat resistance, flame retardancy and scratch resistance.
Product Application
1. Location of identification: The surfaces pasted on the following positions, such as electrical switches, remote control panels, wall switches, plugs, sockets, locks, flashlights, door handles, handrails, fire extinguishers, fire alarms, life-saving appliances, etc., can indicate their location for easy use.
2. Safety signs: they can be attached to the following positions to serve as safety warnings, such as emergency evacuation passages, subway stations, underpasses, civil air defense projects, karaoke halls, dance halls, cinemas, supermarkets, hospitals, railway stations, airports, docks, etc.
[Precautions]
1. The construction shall be carried out on the flat surface, and the construction temperature shall be 10-40 ℃.
2. The luminous film can be cut into various shapes and directly pasted to a certain place (such as a telephone, switch, etc.) for decoration and indication.
3. The luminous film surface is silk printed with patterns, characters and other methods to form a bottom lining for luminescence.
4. When pasting on the object surface, the object surface shall be cleaned first, and the surface shall be free of oil stain, dust, etc.
5. The luminous film has a certain thermal expansion and cold contraction. The sliced luminous film cannot be placed randomly, but should be clamped or pressed with heavy objects to prevent deformation and curling.
6. The size of the backing paper of the adhesive luminous film is greatly affected by the humidity. The sliced luminous film should be processed under the relative humidity of 40-60% to prevent curling.
7. When using, remove the release paper on the back of the luminous film, apply a certain amount of pressure on the luminous film and paste it evenly on the surface of the treated object. Pay attention to the edges and corners.
8. The same type of luminous film will have a certain color difference in order to ensure the luminous brightness of different batches.
9. There may be joints when the luminous film roll length exceeds 20M.
Packaging and Storage
1. Packaging: roll or sheet form, externally packaged with plastic film.
2. Storage: ※ It shall be stored in a ventilated, dry and cool warehouse with a storage temperature of 15-30 ℃ and a relative humidity of 40-60%.