Blue green luminous tape Fluorescent tape for stage decoration

Product Features
1. Light absorption in bright places and light emission in dark places. The bright part can absorb sunlight, light, ambient stray light and other visible light, and the dark part can automatically and continuously emit light, giving people more information in the dark.
2. No power supply is required. The product is non-toxic, non radioactive and chemically stable after being tested by the Chinese Academy of Metrology.
3. Low excitation conditions, sunlight, general lighting and ambient stray light can be used as excitation light sources.
4. The high brightness and long luminous time far exceed the requirements of fire evacuation.
5. Simple installation and convenient maintenance. It can be flexibly installed according to the actual needs of public places, and signs can be installed at different parts of the ground, ladder surface and ceiling.
6. It can be reused for unlimited times with a safety factor of 100%.
7. It has good aging resistance, corrosion resistance, heat resistance, flame retardancy and scratch resistance.
[Application Scope]
1. Location of identification: The surfaces pasted on the following positions, such as electrical switches, remote control panels, wall switches, plugs, sockets, locks, flashlights, door handles, handrails, fire extinguishers, fire alarms, life-saving appliances, etc., can indicate their location for easy use.
2. Safety signs: they can be attached to the following positions to serve as safety warnings, such as emergency evacuation passages, subway stations, underpasses, civil air defense projects, karaoke halls, dance halls, cinemas, supermarkets, hospitals, railway stations, airports, docks, etc.
[Precautions]
*The construction shall be carried out on a flat surface, and the construction temperature shall be 10~40 ℃.
*The luminous tape can be cut into various shapes and directly pasted to a certain place (such as a telephone, switch, etc.) for decoration and indication.
*When pasting on the object surface, the object surface shall be cleaned first, and the surface shall be free of oil stain, dust, etc.
*The luminous film has a certain thermal expansion and cold contraction. The unused luminous film cannot be placed at will. It should be clamped or pressed with heavy objects to prevent deformation and curling.
*When using, remove the release paper on the back of the luminous film, apply a certain pressure on the luminous film and paste it flat on the surface of the treated object, and pay attention to the edges and corners.